Thursday, November 27, 2008

Brief History of Light Emitting Diode (LED)

LED lamp History

The phenomenon of solid state junctions producing light was discovered in the crystal detector era. In the 1960s commercial red LED’s became available, and by the 1970s these were in widespread use as indicators in a very wide range of equipment. These early LED’s had much too small an output to be useful as lighting. They replaced the previously widely used indicator types of filament lamps and neon. Compared to neon, indicator LED’s have longer lifetimes and run on lower voltage; compared to miniature filament lamps, indicator LED’s have much longer lifetimes, such that they do not require replacement, and consume less power. The lack of need for replacement also eliminates the need for bulb sockets and a user access port.

Commercial amber (yellow) and orange LED’s followed, and were used where differentiation of multiple LEDs was required. For many years LED’s came in infra-red, red, orange, yellow, and green. Blue, cyan, and violet LEDs finally appeared in the 1990s.

To produce a white SSL device, a blue LED was needed. In 1993, Shuji Nakamura of Nichia Corporation came up with a blue LED using gallium nitride (GaN). With this invention, it was now possible to create white light by combining the light of separate LED’s (red, green, and blue), or by placing a blue LED in a package with an internal light converting phosphor. With the phosphor type, some of the blue output becomes either yellow or red and green with the result that the LED light emission appears white to the human eye.

In 2008, SSL technology advanced to the point that Sentry Equipment Corporation in Oconomowoc, Wis. was able to light its new factory almost entirely with LEDs, both interior and exterior. Although the initial cost was three times more than a traditional mixture of incandescent and fluorescent bulbs, the extra cost will be repaid within two years from electricity savings, and the bulbs should not need replacement for 20 years.